Tuesday, January 14, 2014

Sound System Requirements for Live Sikh Wedding Programs

Sound System Requirements for Live Sikh Weddings – 
Dr. Freedom & Leela

·       Having an ideal sound system can make or break your Sikh Wedding Ceremony. These are our basic sound system requirements so we can give you the best program. 
·       Most importantly, we will need a LIVE SOUND Technician for the entire ceremony and he must have his head covered with a head covering provided, no hoodies or ball hats.

·       The Sound System MUST be set up and ready for a sound check 2 hours before the ceremony.


Sound System Requirement List:
FIVE (5)  Small Tripod Microphone Boom Stands
THREE (3)  Vocal SM58  Microphones
TWO (2) Instrumental  SM57  Microphones
EIGHT (8)  15’ XLR microphone cables
EIGHT (8) Channel XLR mixer WITH REVERB AND EFFECTS
TWO (2)  Speaker stands
TWO (2)   Powered Speakers - min. 15” Powered Speakers or as per needed for room volume
TWO (2)   Monitors
FOUR (4)  Speaker cables - for mixer to Main and Monitor Speakers
ONE (1)  power bar with extension wire for power to the stage

We have a DI - Direct Box, 2 channels,  that we will be sending out from our laptop to run rhythm loops to connect to your mixer.  The XLR cables we need have been accounted for in the list above.
We will also be needing a feed from the mixing board , a 1/4 or mini jack out in stereo to make a digital recording (we have the recording device and cables).

IMAGES OF SOUND SYSTEM

FIVE (5)  SMALL microphone tripod stands with a boom arm





THREE (3)   Vocal SM58 microphones 





Two (2)  Instrumental SM57 microphones 




EIGHT (8)  15’ XLR microphone cables 


EIGHT (8) Channel XLR mixer

Must have REVERB  EFFECTS




Musician Stage Set up layout as per below:


Musician Stage Riser should be at least  8’ length X 6' width  X 16" high

*** PLEASE NOTE WE SIT CROSS-LEGGED AND SING SITTING ON THE STAGE FLOOR,  PLEASE MAKE SURE THE BOOM STANDS ARE THE SMALL TYPE.  
_________________________

Back of Riser
Riser 8 feet length, 6 feet width, and 16” high
Power to Stage - 1 power bar with extension wire


Freedom                                   Leela
             1 Vocal SM58, 2 SM57’s               1 Vocal SM58, 2 XLR’s for DI box
3 Boom Stands                                  1 Boom Stand

1 Monitor                                                     1 Monitor
Front of Riser
__________________________

(1 vocal SM58 and boom stand will be set on the Altar Stage)


Visual Set Up for Musician Stage










Search This Blog